3131, Voortman, 630M, CNC 36" VB- Band Sawing / Drilling Machine, 2008

3131, Voortman, 630M, CNC 36" VB- Band Sawing / Drilling Machine, 2008

Contact us for price

Enfield, CT

orCall 860-623-5700

Description

1 TECHNICAL SPECIFICATION OF THE SYSTEM


Operating range:


Min/max height : 3/8"- 18"

Min/max width : 2-1/2"- 42"

Capacity : 300 lbs/ft

Max. positioning weight 20,000 lbs


Guide rail for measuring system:

Measuring length

Toothed gear rack

Dimension steel strip

Cable train and cable tray  


2 APPLICATION AREA

Flat

Angle Steel : (equal/unequal)

U-Profile : (channels)

I-Proflie

H-Profile

Universal beams

Universal columns

Tubes : (square/rectangular)

T profile

W profile : (wide flange beams)


3 TECHNICAL SPECIFICATION VB-BANDSAWINGMACHINE 

Horizontal mitre cutting bandsawing machine VB1050 

Cutting capacity (h x w)   0° : 20" x 44"

Cutting capacity       +/- 30° : 20" x 36"

Cutting capacity       +/- 45° : 20" x 28"

Cutting capacity       - 60° : 20" x 18"

Sawband speed stepless : 135' - 400' per minute 

Saw drive motor : 10 hp

Sawband dimensions : 31,3' x 2,12" x 0,063"

Hydraulic band tension : 10.800 lbf

Net weight : approx. 8,8 Tons


4 TECHNICAL SPECIFICATION PER PART

The machine is build up with below mentioned systems; see also the lay-out drawing. 


4.1 CNC-control V630 Drilling system

- 2 pcs. Industrial PENTIUM computers with intel Pentium 


4.2 HYDRAULIC UNIT

- motor power pump 4kW

- max. pressure 160 bar


4.3 TRANSPORT SYSTEM(S)

- motor power transverse system infeed kW

- motor power feeder truck kW

- speed feeder truck m/min

- positioning accuracy mm

- motor power outfeed transverse transport kW

- motor power outfeed kW


4.4 DRILLINGUNITS

- Max. positioning weight 20,000 lbs

- Drill diameter 5/16" - 1-9/16"

- Thread tapping 3/8"- 1"

- Clamping range horizontal 2"- 40"

- Lubricant internal cooling air/oil

- Flange & Web height measuring included

- Profile width measuring included

- Centring possibility yes, 3 sides

- Automatic tool changer yes, 3 x 5 positions

- Spindle rpm min. 100 rpm max. 2.500 rpm 

(Servo driven)  


4.5 NUMBERING UNIT 

- number of disks 1 

- character height 0.39"mm

- number of characters 1 x 36 Characters



5 TRANSPORT AND WEIGHTS

The machine must be transported with a crane per system. 

Per system will be described below what the gross weights are.


Drilling system (weight approx 8.26 Tons)

For lifting this part, lifting eyes are provided on top of the system. 

This part can be lifted with suitable liftchains. Take care of damage.


Infeed roller conveyor + transverse transport / outfeed roller conveyor + transverse transport (weight approx 2.2 Tons per system)

They can be lifted with lifting belts on the frames.


Feedertruck and truckguidance (weight approx 0,88 Tons)

They can be lifted with liftingbelds on the frames.

Take care of damage.


Sawing machine 

For lifting the sawing machine the lifteyes must be used. The liftingeyes must be fixed on top of the sawing machine. For this purpose screwtaps are provided in the frame (see also manual VOORTMAN).

Take care of damage.


Numberingunit (weight approx 1,1 Tons)

The numberingunit can be lifted with lifting belts on the frame.

Take care of damage.


6 INSTALLATION AND ASSEMBLING

The systems will be place with a crane (with the special frame) on the right place in the shop, as much as possible in line. Afterwards the systems will be lined out as well as in the length direction as in height. After the whole machine is lined out the holes can be drilled in the floor (through the holes of the fixing plates on which the machine is staying) and the frames can be fixed to the floor. 

Afterwards the hydraulic and pneumatic tubes must be connected. See also chapter 2.1, 2.2 and 2.3 and the electrical drawings for the connections and putting in operation of the central control system. Voortman have to do the installation.


7 DISASSEMBLING

First the system must be switched off and bring down the pressure of the hydraulic system. Disconnect the hydraulic and pneumatic tubes. Disconnect the electric cabling. See chapter 2.6!!!

Remove the fixing bolds and disconnect the supports of the transverse transport. with help of the transport frame the machine can be transported. 

At final dismantling of the system take care that the hydraulic oil, oil in gear boxes and reservoirs will be removed on an environmental friendly way


Specifications

ManufacturerVoortman
Model630M
Year2008
ConditionUsed
Stock Number3131